Service 01
Pool Care & Maintenance
Scheduled service, water chemistry, cleaning and equipment inspection — with a worklog you can actually read after every visit.
Explore Pool Care & Maintenance
Local · Fort Bend, Harris & Waller counties
Pool Automation in Katy, TX
Katy is not one place. It is dozens of communities across three counties, with pools from the 1980s to last month — and one very long, very hot season that all of them share.
Short answer
AquaLit provides pool automation, smart pump installation, chemistry automation, heating and cooling, lighting and repairs throughout Katy, TX — on the Fort Bend, Harris and Waller county sides alike — including Grand Lakes, Seven Meadows, Firethorne, Cane Island, Elyson, Kelliwood, Nottingham Country, Falcon Ranch and Pine Mill Ranch. Cinco Ranch has its own page.
Most Katy pools can be automated without rebuilding. Our featured first step is the Moov AI 2.0 HP inverter pump installed under standard conditions; freeze protection comes built into a properly set up system.
Local conditions
What Katy asks of a pool
A long season means run-time is the cost that matters
Katy pools run hard from April into October, and most run year-round. Circulation is typically the largest electrical load on the pad, and a single-speed pump on a timer runs at full output whether the pool needs it or not. An inverter pump that holds a flow target instead is the single biggest lever on the running cost of a Katy pool. We will not quote you a guaranteed percentage; your result depends on your plumbing and your rate.
Freeze protection is not optional any more
The February 2021 freeze damaged pool equipment across the Houston area, and Katy was no exception — cracked pump housings, split filter tanks, heaters that never fired again. A properly set up automation system runs the pump when the air temperature drops and keeps water moving through the equipment. It is one of the least glamorous things automation does, and one of the most valuable here.
Three counties, one set of problems
The Katy name covers land in Fort Bend, Harris and Waller counties, and the pools range from 1980s Nottingham Country and Kelliwood to Elyson and Cane Island homes still under warranty. The equipment problems are the same everywhere; what changes is whether the pad is a retrofit or a plan-ahead.
Storm season and suburban trees
Gulf Coast storm season and the now-mature trees of Katy's 1990s and 2000s communities both load skimmers and filters. Robotic cleaning takes the routine work out of that; it does not replace skimming after a storm.
Water
Katy is served by the city and by a large number of utility districts. Hardness varies. We test fill water at the assessment because it changes what we say about salt cells and dosing.
Priorities
What to automate first in Katy
The order below reflects a long season and a real freeze risk, not a generic list.
| Priority | Upgrade | Why it ranks here in Katy |
|---|---|---|
| 01 | Smart circulation | Runs most hours of the year here; the biggest energy lever and the foundation for everything else |
| 02 | Freeze protection | Built into a properly configured system — the 2021 freeze made the case |
| 03 | Cooling capability | More Katy days are lost to water being too warm than too cold |
| 04 | Robotic cleaning | Mature trees in the older communities, storm debris everywhere |
| 05 | Chemistry automation | High summer demand and long unattended stretches |
| 06 | Central automation | Once a spa, valves, lighting and climate all need coordinating |
A pool with a failing heater and a good pump should ignore this order and fix the heater.
Services in Katy
What we do locally
The same automation categories, delivered by a team based in Weston Lakes rather than routed from across Houston.
Service 02
Pool Repairs
Pumps, heaters, filters, salt systems, valves, leaks and controllers. We diagnose the cause before quoting the fix.
Explore Pool Repairs
Service 03
Renovations & Remodeling
Surface, tile, coping, lighting and equipment-pad rebuilds — pools brought back to better than they started.
Explore Renovations & Remodeling
Service 04
Smart Circulation
An inverter pump that adjusts itself to hold the flow your pool actually needs — not one fixed speed you guessed at.
Explore Smart Circulation
Service 05
Automated Water Care
Sensors and dosing equipment that handle more of the routine sanitizer and pH work between service visits.
Explore Automated Water Care
Service 06
Smart Climate
Heat when a Texas cold front lands, cool when August overheats the water. Set a temperature, not an equipment schedule.
Explore Smart Climate
Service 07
Automated Cleaning
A scheduled robotic cleaner takes the most repetitive job off the list — floors, walls and waterline depending on model.
Explore Automated Cleaning
Service 08
Smart Pool Lighting
Colour, scenes and schedules you control from your phone — including specialty lighting work on existing fixtures.
Explore Smart Pool Lighting
Service 09
Smart Backyard
Valves, spa mode, waterfalls, bubblers and deck jets responding to one button instead of a trip to the equipment pad.
Explore Smart Backyard
Service 10
Central Automation
One brain for the pool. Poolside Tech Attendant, Pentair IntelliCenter or Jandy AquaLink — chosen around your equipment.
Explore Central Automation
Service 11
Saltwater Conversion
A salt cell that generates chlorine so you stop handling tablets. We will also tell you when salt is not the better call.
Explore Saltwater Conversion
Fit check
Which Katy pools benefit most
Automation pays off here if
- You are still running a single-speed pump on a timer
- You lost equipment in the 2021 freeze, or worried you would
- The pool sits unusably warm through July and August
- Mature trees or storm season keep the skimmer loaded
- There is a spa with valves you turn by hand
- You travel, or the pool goes unwatched for stretches
Fix something else first if
- The plumbing at the pad is brittle or leaking
- A heater or filter is failing and needs replacing anyway
- Electrical capacity at the pad is the real constraint
- Your equipment is recent and already does what you need
Questions
Katy pool automation FAQ
A properly configured system runs the pump when the air temperature drops so water keeps moving through the pump, filter and heater, which is what prevents the cracking that ruined so much equipment in February 2021. It is protection against a normal Houston freeze, not a guarantee against a multi-day grid failure — in that case we also want you to know how to drain the pad, and we will show you.
All of it — Fort Bend, Harris and Waller county sides. Grand Lakes, Seven Meadows, Firethorne, Cane Island, Elyson, Kelliwood, Nottingham Country, Falcon Ranch, Pine Mill Ranch, Katy Creek Ranch and the older streets in the city itself. Cinco Ranch has its own page because the pads there have their own pattern.
Our featured entry package is the Moov AI 2.0 HP inverter pump installed under standard conditions. Robotic cleaning, lighting and chemistry automation each sit in their own range depending on your equipment and pad. Full central automation is custom quoted after we see the pad. We do not publish an all-in figure because the honest number depends on your plumbing and electrical.
It can be, if convenience is what you are buying. Fill-water hardness varies by district in Katy, and hard water shortens salt cell life. If lowest lifetime cost is your goal, automated liquid chlorine dosing is often the better recommendation. We test your water before advising.
Katy is a regular drive from Weston Lakes. Assessments are free and we usually confirm a window within one business day. Texting 832-299-5570 is often fastest.
AquaLit's recommendation
For a typical Katy pool, start with circulation — it runs more hours here than almost anywhere — and make sure freeze protection is configured as part of it. Then add cooling before heating, and cleaning if you are under trees.
Call or text 832-299-5570 and you reach the people who will be standing at your equipment pad.
- Circulation first — the biggest lever on a long season
- Freeze protection configured, not assumed
- Cooling before heating
- Central control once several systems need coordinating
Nearby
Neighbouring communities
Beyond automation
Pool care & repairs in Katy
The same local team keeps Katy pools clean, balanced and working — automation is one branch of the work, not the whole of it.
Let's talk about your pool
Call or text for a free pool assessment. We look at the pool, the equipment already on your pad and how you actually use the backyard — then tell you what is worth doing and what is not.
Free pool assessment
Tell us what you have and how you use the pool. We'll walk the equipment pad, ask what you ultimately want controlled, and give you an honest recommendation — including the upgrades we'd skip.
832-299-5570 (call or text)
info@aqualitpools.com
Weston Lakes, TX — serving greater Houston
Mon–Fri 8am–6pm · Sat 8am–2pm